Find your diameter
Measure straight across the center of your circular bed, edge to edge. For a tree ring, also measure the center you want to leave uncovered.
Measure a round bed or a ring around a tree, choose your added mulch depth, and estimate cubic yards, whole bags, and bag costs. Subtract an unmulched center with Tree ring mode.
Measure edge to edge through the center—not the distance around it.
The thickness of your mulch layer.
The empty space inside your tree ring.
Allowance changes the order quantity, not the recommended layer depth. Dimensions shown are examples.
Measure straight across the center of your circular bed, edge to edge. For a tree ring, also measure the center you want to leave uncovered.
Enter the depth you plan to add. If you already have mulch, calculate only the additional layer you need.
Use cubic yards when ordering bulk mulch, or choose your bag size for a whole-bag shopping estimate. Check your supplier’s actual bag volume.
Area = π × (diameter ÷ 2)²Volume = area × depthFor a tree ring, subtract the inner circle’s area first. All lengths are converted to matching units before calculation. One cubic yard equals 27 cubic feet.
Example: A 10 ft wide circle with 3 in of mulch needs about 19.63 cubic feet, or 0.73 cubic yards. That’s 10 bags of 2 cubic feet, without extra allowance.
No. Diameter is the full distance across the center. Radius is half that distance. This calculator uses diameter.
Select Tree ring. Enter the outer diameter and the diameter of the center that will remain unmulched. The calculator subtracts that center from your bed area.
Mulch is usually sold in whole bags. A result of 9.82 bags becomes 10 so you can cover the calculated volume.
Only when you select the 10% extra option. The extra is applied to volume before the bag count and bag cost are calculated. Actual needs can vary with ground shape and material compaction.
A circular bed needs enough mulch to cover its area at the depth you plan to add. Measure the diameter through the center, then enter that value and the additional layer depth above. The calculator converts the measurements to matching units before finding the volume. For beds that are oval, rectangular, or different sizes, use the general mulch calculator to add separate sections.
These examples use a full circle with a 3-inch layer, no excluded center, and no extra allowance. Three inches is an example for the calculation, not a recommendation for every plant or product.
| Bed diameter | Cubic yards | Bags to buy |
|---|---|---|
| 4 ft | 0.12 | 2 |
| 6 ft | 0.26 | 4 |
| 8 ft | 0.47 | 7 |
| 10 ft | 0.73 | 10 |
| 12 ft | 1.05 | 15 |
| 16 ft | 1.86 | 26 |
Choose Tree ring when the bed has an unmulched circular center. Enter the outside diameter of the mulched area and the diameter of the center you are leaving clear. Both measurements must pass through the same center. The inner diameter must be smaller than the outer diameter. Enter the size of the whole excluded area, rather than just the trunk, if you are leaving a gap around it.
For example, a 10-foot outer diameter with a 2-foot unmulched center has about 75.40 square feet of mulched area. At 3 inches deep, it needs 18.85 cubic feet, or 0.70 cubic yards, before an allowance. That rounds up to 10 bags of 2 cubic feet each. The optional 10% allowance increases the volume to 20.73 cubic feet and the purchase to 11 bags.
For a refresh, measure the existing layer in several places before deciding how much more to add. Enter only that additional depth. This tool calculates volume; it does not decide a suitable application depth or certify a playground surface. Choose a depth using the product instructions and guidance appropriate to the plants and site. Keep the trunk clear instead of piling mulch against it.
Bag counts use the volume printed on your selected bag size and round up to whole bags. A rounded display of cubic yards is not a supplier order increment. Ask your bulk supplier about minimum orders and delivery charges. The optional cost field on this page multiplies whole bags by your entered price; it excludes tax, delivery, installation, and pickup costs.
To compare delivered bulk with bags, use YardTotal’s bags versus bulk guide and the price comparison on the main mulch calculator. For finished compost applied to a lawn or bed, use the compost calculator. Prices are your inputs, not live retailer quotes.